HOME > 최근학술발표논문 > 해외 학회발표 Proceeding지 게재실적
 
 
 
 
 
 
   
  해외 학회에서 발표된 본 연구실의 우수한 논문에 대해 알려드립니다.
 
번호
발표자
논 문 제 목
학회명(국가)
게재일
1 김현호, 강충길 Numerical Simulation and Its Experimental Study for
Rheo-Forged Component by Using Direct and
Indirect Die System
중국 2010.09
2 강충길, 김현호 THE Fabrication of Automobile Components by
Applying Electromagnetic Stirring in Semisolid
Process
중국 2010.09
3 김현호, 강충길 THE EFFECT OF DIE CURVATURE AND MATERIAL
ANISOTROPY IN U-BEDNING OF AZ31 MAGNESIUM
ALLOY SHEET ON SPRINGBACK
중국 2010.11
4 권해준, 강충길 Formability of Aluminium embossing sheets with
controlled machine of stamping for PEM Fuel Cell
중국 2010.11
5 백승철, 강충길 Three step continuous Deep Drawing process of
AZ31 Material
중국 2010.11
6 최홍석, 김병민, 강충길 Development of hot stamped center pillar by
optimization of process parametersin form type
of 4piece die sets
일본 2010.09
7 안상현, 강충길 Temperature distribution design of partial die
quenching for bump part fabrication and it
process analysis
일본 2010.09
8 배정운, 강충길 DEVELOPMENT OF DIRECT AND INDIRECT
RHEO-FORGING PROCESS OF WROUGHT
ALUMINIUM ALLOYS WITH CONTROLLED
SOLID FRACTION
일본 2010.10
9 임상섭, 강충길 Heat treatment conditions of low caborn steel
part used in the deep sea
중국 2010.06
10 이양, 안상현,
강충길
Investigation on mechanical properties of boron
steel for variation of quenching temperature and
its hot press forming simulation
Korea 2010.06
11 김태원, 강충길, 박상식 A study of the development of a new type of bulb
bracket for offshore structures using suitable
casting steel
Korea 2010.06
12 김현호, 강충길 Computer-assisted Rheo-forging process of
A 356 Aluminum
Korea 2010.06
13 안상현, 권기영, 강충길 Mechanical characterization behavior of boron
steel sheet in hot press forming process with
cooling system
말레이시아 2009.10
14 정유나, 이상매, 강충길 Evaluation of mechanical properties and various
pile-up of plate-type polymer using nanoindenter
말레이시아 2009.10
15 김현호, 강충길 Numerical and experimental study of semi-solid
A356 aluminum alloy in reho-forming process
말레이시아 2009.10
16 권기영, 김낙현, 강충길 The effect of cooling rate on mechanical properties
of 22MnB5 steel during hot press forming
말레이시아 2009.10
17 김낙현, 권기영, 강충길 The Effect of cooling rate on mechanical
properties in hot poress forming of Al-Si coated
22MnbB5 sheet and it theoretical temperature
prediction
UK 2009.06
18

babu,
Chung-Gil Kang, 정유나

Nanoindentation behavior of aluminium based
hybrid composites with GNF/Al2O3sf
India 2009.01
19 Suresh Babo, Chung Gil Kang Fabrication and properties of magnesium based
hybrid composites with graphite nanofibers and
alumina short fibers
UK 2009.07
20 Y.N.Joung, Chung Gil Kang Nanoindentation Behaviour of Mg Based Hybrid
Composites with Graphite nanofiber/Alumina Fiber
UK 2009.07
21 babu,
Chung-Gil Kang
Processing and characterization of GNF/Al2o3sf
reinforced aluminium matrix composites
India 2008.12
22 HYUN-JUN OH, EUN-KYUNG LEE,
CHUNG-GIL
KANG FINITE ELEMENT ANALYSIS OF
THERMAL NANOINDENTATION PROCESS
AND ITS EXPERIMENTAL VERIFICATION
AEPA2008(Korea) 2008.10
23 KI-YOUNG KWON,
CHUNG-GIL KANG,
SANG-MAE LEE
DYNAMICS BEHAVIOR ANALYSIS OF
GLOBULAR PARTICLE IN RHEOLOGY
MATERIAL WITH CONTROLLED SOLID
FRACTION
AEPA2008(Korea) 2008.10
24 Suresh Babu, Chung.Gil. Kang Processing and Characterization of
GNF/Al2O3sf Reinforced Magnesium Matrix
Hybrid Composites
The 1st International Symposium on Hybrid Materials and Processing
(Korea)
2008.10
25 Hyun-jun Oh, Chung-Gil Kang Finite Element Analysis for Hyper-fine Pattern
Fabrication by Application of Thermal
Nanoindentation Process and Its
Experimental Verification
The 1st International Symposium on Hybrid Materials and Processing
(Korea)
2008.10
26 Eun-kyung Lee, Chung-Gil Kang Creep of Plate Polymer in
Thermal-Nanoindentation Process for
Hyperfine pit structure Fabrication
The 1st International Symposium on Hybrid Materials and Processing
(Korea)
2008.10
27 Ki-Young Kwon, Chung-Gil Kang Hybrid Material of Nano-sized Particles
Reinforced Metal Matriz Composite by
Combined Stirring Method in Molten
Aluminum Alloy
The 1st International Symposium on Hybrid Materials and Processing
(Korea)
2008.10
28 C.G.Kang,
J.W. Bae
Semi-Solid Forming Process and its
Industrial Trend
ICTP 2008(Korea) 2008.09
29 Eun-Kyung Lee,
Sang-Mae Lee,
Chung-Gil. Kang
Evaluation of Mechanical Characteristics
of Plate-Type Polymer Hyperfine Pit
Structure Fabricated by
Thermal-Nanoindentation Process
ICTP 2008(Korea) 2008.09
30 K.T. Kwon,
C.G. Kang,
S.B. Kang
Deep Drawing with Circular and Rectangular
Shape Die and Properties of AZ31 Magnesium
Alloy Sheet
ICTP 2008(Korea) 2008.09
31 J.W. Bae,
S.M. Lee,
C.G. Kang
Forging Process of Wrought Aluminum
Alloy with Controlled Solid Fraction by
Electromagnetic Stirring
S2P 2008(Belgium) 2008.09
32 D.S. Kim,
C.G. Kang,
S.M. Lee
Heat Treatment Processes of A2024
Rheoforging Alloy and Morphology
Investigation by Nanoindentation and Atomic
Force Microscopy
S2P 2008(Belgium) 2008.09
33 H.H.Kim, S.M.Lee,
C.G. Kang
Fabrication of Rheological Material of A356
Aluminum Alloy by Electromagnetic Stirring
through Vacuum Pump
S2P 2008(Belgium) 2008.09
34 Chung-Gil Kang, J.S.Suresh Babu Fabrication and Characterization of
Aluminium Based Hybrid Metal Matrix
Composites
ISEPD2008(Korea) 2008.01
35 C.G.Kang.
S.M. Lee
Rheology forging process of wrought
aluminum alloy
ASPF(New Delphi, India) 2007.11
36 C.G.Kang,
S.M. Lee
Continuous rheology forming of A6061
wrought aluminum alloy by using helical
shape stirrer and its thixoforging process
PRICM(Korea) 2007.11
37 J.W. Bae,
D.Y. Seol,
C.G. Kang
Die life prediction Considering Thermal
Fluid Flow and Solidification Phenomenon
in rheology Process
AMPT(Korea) 2007.10
38 S.M. Lee,
S.H. Han,
C.G. Kang
Thixo forging process of wrought
aluminum alloy fabricated by rotational
helical shape stirrer
AMPT(Korea) 2007.10
39 J.S.Babu, K.P.Nair, C.G.Kang Fabrication and characterization of
aluminum based nano micro hybrid metal
matrix composites
ICCM-16(Japan) 2007.07
40 J. W. Bae,
T. W. Kim,
C. G. Kang
Rheology Forging Process of Wrought
Aluminum Alloy with Controlled Grain Size
The Sixth International Conference on Intelligent Processing and Manufacturing of Materials(Italy) 2007.06
41 H.H. Kim,
S.H. Cho,
C.G. Kang
Evaluation of Precipitation Hardening
Characteristic of Rheo-forged Al 6061
Alloy by Using Nano/Micre Indentation
and Scratch
The Sixth International Conference on Intelligent Processing and Manufacturing of Materials(Italy) 2007.06
42 C.S. Lee,
C.G. Kang
Dynamic simulation of solid/particles
in the thermal behavior of co-exising
solid/liquid
The Sixth International Conference on Intelligent Processing and Manufacturing of Materials(Italy) 2007.06
43 S.W.Oh,
J.W.Bae,
C.G.Kang

Direct forging with rheology materials
Fabricated by electromagnetic stirring
system

10th ICM(Korea) 2007. 5
44 S.H.Cho,
C.G.Kang
Evaluation of mechanical properties
according to grain size in Rheo/Thixo
forming A356 Aluminum alloy by using
nano/micro probe Technology
10th ICM(Korea) 2007. 5
45 J.S.Babu,
K.P.Nair,
C.G.kang
Development of hybrid fiber preform :
Process Optimization and Characterization
2th Int. Conf. on recent Advances in
composite Materials(India)
2007. 2
46 S.H.Cho,
S.W.Youn,
C.G.Kang
Comparison of age-hardening
characteristic in Thixo-cast and Rheo-cast
T5-A356 alloy by nanoindenter and AFM
AEPA(Japan) 2006. 9
47 P.K.Seo,
J.W.Bae,
C.G.Kang
Computer aided simulation of the Rheology
forming process for aluminum alloys and its
experimental investigation
AEPA(Japan) 2006. 9
48 J.W.Bae,
C.G.Kang, S.B.Kang
Mathematical Model for the Twin Roll Type
Strip Continuous Casting of Magnesium
Alloy Considering Thermal Flow
7Phenomena
AMPT(USA) 2006. 7
49 J.W.Bae,
T.W.Kim,
J.H.Ko,
C.G.Kang
Direct rheology forming process of
aluminum alloy with electromagnetic stirring
system
AMPT(USA) 2006. 7
50 C.G.Kang,
J.W.Bae,
B.M.Kim
The effect of electromagnetic stirring
direction on the globularization
microstructure for rheology forging
AMPT(USA) 2006. 7
51 W.Y.Kim,
C.G.Kang,
B.M.Kim
Deformation behavior of wrought aluminum
alloys in incremental compression
experiment with a closed die
AMPT(USA) 2006. 7
52 C.G.Kang,
J.W.Bae,
B.M.Kim
10 C.G.Kang, J.W.Bae,B.M.Kim The grain
size control of A356 aluminum alloy by
horizontal electromagnetic stirring for
rheology forging
AFDM(Korea) 2006. 9
53 S.H.Han,
C.G.Kang,
J.H.Lee
Investigation of voscosity properties for
rheology forming of AM50A magnesium
alloy
AFDM(Korea) 2006. 9
54 C.G. Kang Forging process simulation and casting
tool design rules for rheology forming
Proceeding of the 4th JSTP international seminar on precision forging (Japan) 2006. 3
55 S.H. Cho,
S.W. Youn,
C.G. Kang
Age-hardening Characteristic of Thixo
-cast A356 Alloy Investigated by Using
Nano Indenter and AFM
Int. Sym. Nanoengineering (Korea) 2005.10
56 J.W. Bae,
C.G. Kang
Mathematical model for Mg sheet
fabrication by twin roll strip casting
process
1st Asian Sym. On Magnesium alloy (Korea) 2005.10
57 C.G. Kang,
D.K. Chu,
J.H. Lee
Effect of Tool Surface Treatment and
Temperature on Deep Drawability
of AZ31 Magnesium Alloy Sheet
1st Asian Sym. On Magnesium alloy (Korea) 2005.10
58 S.W. Youn,
H.I. Kim,
C.G. Kang
A Study on Micro/Nanopattern
Fabrication of Nickel and Copper
by Using Nanoindenter and Electroless
Deposition Technique
8th Int. Conf. on Plasticity of Plasticity (Italy) 2005.10
59 D.K.Cho,
C.G.Kang,
J.H.Lee
Evaluation of Drawability at Warm and
Hot Magnesium Sheet Forming with Real
Time Control of Blank Holding Force
8th Int. Conf. on Plasticity of Plasticity (Italy) 2005.10
60 S.W. Youn,
S.H. Cho,
C.G. Kang
Nano/Micro-indentation, scratching and
atomic force microscopy of rheoformed Al-
Si-Mg alloy for characterization of surface
deformation behavior
8th Int. Conf. on Tech. of Plasticity (Italy) 2005.10
61 S.W. Youn,
H.I. Kim,
C.G. Kang
A study hyperfine pattern fabrication of
metals by using nanoindenter and
electroless deposition technique
8th Int. Conf. on Tech. of Plasticity (Italy) 2005.10
62 P.K.Seo, C.G.Kang Thixo and Rheo Die Casting for
Automobile Suspension Parts
8th International conference on Advances in Materials and Processing Technologies (Poland) 2005. 5
63 S.W.Youn, J.W.Lee, C.G.Kang A Study on the Deformation Behavior of
Rheology Material Using Nanoindenter
and atomic force microscopy
8th International conference on Advances in Materials and Processing Technologies (Poland) 2005. 5
64 P.K. Seo,
C.G. Kang
The Effect of Raw Material Fabrication
Process on Microstructural
Characteristics in Reheating Process
for Semi-Solid Forming
8th International conference on Advances in Materials and Processing Technologies (Poland) 2005. 5
65 S.W. Youn,
H.I. Kim,
C.G. Kang
A study on the effect of pattern pitch on
deformation behaviors for surface
patterning by using nano-indenter
2nd Int. Symposium on nano-manufacturing (Korea) 2004.11
66 K.M. Yoon, Y.J. Ko, J.D. Lim, C.G. Kang, J.S. Lee The optimization of aluminum SSM knuckle
by new concept of die tooling
8th Int. Conf. on Semi-Solid Proc. of Alloys and Composites (Cyprus) 2004. 9
67 C.G. Kang,
P.K. Seo,
M.D. Lim
Rheo and thixo die casting for automobile
suspension parts
8th Int. Conf. on Semi-Solid Proc. of Alloys and Composites (Cyprus) 2004. 9
68 C.G. Kang,
P.K. Seo,
J.S. Lee
Continuous fabrication of rheology material
by rotational barrel type with induction
heating system
8th Int. Conf. on Semi-Solid Proc. of Alloys and Composites (Cyprus) 2004. 9
69 P.K. Seo,
B.M. Kim,
C.G. Kang
Numerical analysis of single and two-
phase flow for rheology process
8th Int. Conf. on Semi-Solid Proc. of Alloys and Composites (Cyprus) 2004. 9
70 P.K. Seo,
B.M. Kim,
C.G. Kang
The comparison of reheating process in
A356 alloy manufactured electromagnetic
stirring and extrusion for semi-solid
forming
8th Int. Conf. on Semi-Solid Proc. of Alloys and Composites (Cyprus) 2004. 9
71 P.K. Seo,
C.G. Kang
Numerical Simulation for Rheology process
of semi-solid alloy with controled solid
fraction
2nd Korea-US workshop on advance in metallic structure materials (Korea) 2004. 5
72 P.K. Seo,
K.J. Park,
C.G. Kang
Semi-solid Die Casting Process with
Three Steps Die System
Int. Conf. on Advanced Materials & Processing Technologies (Ireland) 2003. 7
73 P.K. Seo,
S.W. Youn,
C.G. Kang
Numerical Visualization of Viscosity in
Phase Transformation Formaing Proces
with Controlled Liquid Fraction
Int. Conf. on Advanced Materials & Processing Technologies (Ireland) 2003. 7