HOME > 최근학술발표논문 > 해외 논문게재 실적
 
 
 
 
 
 
   
  우수한 연구 실적은 해외에서도 인정 받고 있습니다. 해외에서 발표된 논문에 데헤서 보고 합니다.

 
번호
발표자
논 문 제 목
게재지
SCI
여부
게재일
1 권해준
강충길
Formability of aluminium embossing sheets with controlled
stamping machine for PEM fuel cell
MATERIALS RESEARCH INNOVATIONS   2011.2
2 백승철
강충길
강석봉
Three-step continuous deep drawing process of AZ31 material MATERIALS RESEARCH INNOVATIONS   2011.2
3 이상매
강충길
Comparative study of direct and indirect forging processes for
rheological material of A356 aluminium alloy
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE   2011.1
4

Bolouri Amir
Shahmiri M
강충길

Study on the effects of the compression ratio and mushy zone
heating on the thixotropic microstructure of AA 7075 aluminum
alloy via SIMA process
JOURNAL OF ALLOYS AND COMPO   2011.1
5 이상매
강충길
강석봉
The effect of a multistep deep-drawing process with circular
and rectangular shapes on the deformation of AZ31 magnesium
sheets
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY   2010, 12
6 김현호
강충길
Reduction in Liquid Segregation and Microstructure
Improvement in Semi-Solid Die Casting Process Varying
Injection Velocity
Metallurgical and materials transactions B   201012
7 김현호
강충길
Numerical Simulation and Experimental Study for Rheo-Forged
Component by Using Direct and Indirect Die System
Transactions of Nonferrous Metals Society of China   201009
8 바부
강충길
Nanoindentation behaviour of aluminium based hybrid
composites with graphite nanofiber/alumina short fiber
MATERIALS&DESIGN   2010.12
9 최홍석
김병민
강충길 외3
Development of hot stamped center pillar by optimization of
process parametersin form type of 4piece die sets
Steel research international   2010.08
10 안상현
강충길
김병민
Temperature distribution design of partial die quenching for
bump part fabrication and process analysis
Steel research international   2010.08
11 BabuJSS
NairKP
UnnikrishnanG
KangCG
Development of Aluminum-based Hybrid Composites with
Graphite Nanofibers/Alumina Short Fiber: Processing and
Characterization
Journal of Composite Materials   2010.08
12 이은경
강충길
이상매
Evaluation of Mechanical Characteristics of the Plate-Type
Polymer Hyperfine Pit Pattern by the Nanoindentation Process
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING   2010.06
13 이상매
김현호
강충길
The Effect of Applied Forging Pressure on Primary Structure
Deformation in Rheology Forging Process With Solid Fraction
Controlled A356 and AA2024 Alloys
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME   2010.04
14 BabuJSS
NairKP
UnnikrishnanG
KangCG
KimHH
Farication and Properities of magnesium (AM50)-based
Composites with Graphite Nanofiber and Alumina Short Fiber
Journal of Composite Materials   2010.04
15 김현호
강충길
Evaluation of Precipitation Hardening Characteristics of
Rheology-Forged Al 7075 Aluminum Alloy Using Nano- or
Microindentation and Atomic Force Microscopy
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE   2010.03
16 이상매
강충길
Comparative study of direct and indirect forging processes for
rheological material of A356 aluminium alloy
Materials Science and Technology   2009.10
17 PK.Seo
CG.Kang
SM.Lee
A study on reheating characteristics for thixo die casting
precess with electromagnetic stirring and extruded aluminum
alloys and their mechanical properties
International Journal of Advanced Manufacturing Technology   2009.07
18 S.H.Cho
C.G.Kang
S.M.Lee
Development of evaluation technique for microcharacteristics
of thixoforged wrought aluminum alloy by nanoindention and
atomic force microscopy
International Journal of Advanced Manufacturing Technology   2009.06
19 CG.Kang
SM.Lee
The effect of solid fraction and indirect forging pressure on
mechanical properties of wrought aluminum alloy fabricated
by electromagnetic stirring
International Journal of Advanced Manufacturing Technology   2009.05
20 SeoPK
LeeSM
KangCG
A new process proposal for continuous fabrication of
rheological material by rotational barrel with stirring screw
and its microstructural evaluation
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   2009.01
21 JeonYP
KangCG
LeeSM
Effects of cell size on compression and bending strength of
aluminum-foamed material by complex stirring in induction
heating
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   2009.01
22 T.W.Kim
S.M.Lee
C.G.Kang
B.M.Kim
Rheological forging process of A6061 wrought aluminum
alloy with controlled liquid fraction by electromagnetic
International Journal of Advanced Manufacturing Technology 2009.01
23 KwonKY
KangCG
Lee SM
DYNAMICS BEHAVIOR ANALYSIS OF GLOBULAR PARTICLE IN
RHEOLOGY MATERIAL WITH CONTROLLED SOLID FRACTION
INTERNATIONAL JOURNAL OF MODERN PHYSICS B   2008.12
24 OhHJ
LeeEK
KangCG
Lee SM
FINITE ELEMENT ANALYSIS OF THERMAL NANOINDENTATION
PROCESS AND ITS EXPERIMENTAL VERIFICATION
INTERNATIONAL JOURNAL OF MODERN PHYSICS B   2008.12
25 H.H.KIM
S.M.Lee
C.G.Kang
Study of the microstructure and mechanical properties of
Al6061 aluminum alloys rheo forged by vacuum pump
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2008.12
26 H.H.KIM
C.G.Kang
Vacuum-assisted rheo-forging process of A356 aluminum alloys INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
2008.12
27 S.S.Kang
C.G.Kang
S.M.Lee
The effect of indirect forging pressure of wrought aluminium
alloys on material properties by varying solid fraction using
electromagnetic stirring
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
2008.12
28 C.G.Kang
S.M. Lee
The effect of forging pressure on liquid segregation during
direct rheoforging process of wrought aluminium alloys
fabricated by electromagnetic stirring
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
2008.12
29 C.G.Kang
S.M. Lee
Development of a new rheology forming process with
a vertical-type sleeve with electromagnetic stirring
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 2008.11
30 J.W. Bae
S.M. Lee
C.G.Kang
Forging Process of Wrought Aluminum Alloy with Controlled
Solid Fraction by Electromagnetic Stirring
Diffusion and Defect Data Pt.B: Solid State Phenomena X 2008.09
31 H.H. Kim
S.M. Lee
C.G.Kang
Fabrication of Rheological Material of A356 Aluminum Alloy
by Electromagnetic Stirring through Vacuum Pump
Diffusion and Defect Data Pt.B: Solid State Phenomena
X
2008.09
32 D.S. Kim
C.G.Kang
S.M. Lee
Heat Treatment Processes of A2024 Rheoforging Alloy and
Morphology Investigation by Nanoindentation and Atomic
Force Microscopy
Diffusion and Defect Data Pt.B: Solid State Phenomena
X
2008.09
33 T.W.Kim
H.H. Kim
J.W. Bae
S.M.Lee
C.G.Kang
Semi-solid die forging of A16061 wrought aluminium alloy
with electromagnetic stirring
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
2008.09
34 S.W. Oh
C.G.Kang
Forging process of medium-pressure-type rheology
materials fabricated with electromagnetic stirrer
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
2008.08
35 S.H. Cho
C.G.Kang
S.M. Lee

The surface characteristics of Al-7%Si aluminum alloy
manufactured by thixo/rheoforming process through
nanoindentation/atomic force microscopy
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
2008.08
36 C.G.Kang
S.M. Lee
B.M.Kim
A study of die design of semi-solid die casting according
to gate shape and solid fraction
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
2008.08
37 K.S. Yoon
S.M. Lee
C.G.Kang
Two-phase flow characteristics in hollow shape fabrication
process of metal matrix composites by thixoforging
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE 2008.06
38 H.H. Kim
S.H. Cho
C.G.Kang
Evaluation of microstructure and mechanical properties
by using nano/micro-indentation and nanoscratch during
aging treatment of rheo-forged Al 6061 alloy
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 2008.06
39 C.G.Kang
J.W. Bae
Numerical simulation of mold filling and deformation behavior
in rheology forming process
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
2008.05
40 C.G.Kang
S.M.Lee
Effect of solid fraction and pressure on microstructure and
mechanical properties and reduction in liquid segregation
in the thixo-die-casting process with al-7 pct si alloy
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
2008.05
41 J.W.Bae
D.Y. Seol
C.G.Kang
S,M. Lee
Die life prediction considering thermal fluid flow and
solidification phenomenon in rheology process
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
2008.05
42 S.M.Lee
P.K.Soo
C.G.Kang
Effect of injection velocity on structure part characteristic
in AZ50 die casting process with high vacuum system
JOURNAL OF MATERIALS SCIENCE TECHNOLOGY
2008.01
43 S.M.Lee
S.H.Han
C.G.Kang
Thixo forging process of wrought aluminum alloy fabricated
by rotational helical shape stirrer
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
2007.10
44 J.W.Bae
C.G.Kang
S.B.Kang
Mathematical model for the twin roll type strip continuous
casting of magnesium alloy considering thermal flow
phenomena
JOURNAL OF MATERIALS PROCESSING TECHNOLOGYVolume: 191Issue: 1-3
2007.08
45 W.Y.Kim
C.G.Kang
B.M.Kim
Deformation behavior of wrought aluminum alloys in
incremental compression experiment with a closed die
JOURNAL OF MATERIALS PROCESSING TECHNOLOGYVolume: 191Issue: 1-3 2007.08
46 J.W.Bae,
T.Q.Kim
C.G.Kang
Experimental investigation for rheology forming process of
Al-7% Si aluminum alloy with electromagnetic system
JOURNAL OF MATERIALS PROCESSING TECHNOLOGYVolume: 191Issue: 1-3 2007.08
47 C.G.Kang
J.W. Bae
B.M. Kim
The grain size control of A356 aluminum alloy by horizontal
electromagnetic stirring for rheology forging
Journal of Materials Processing Technology
2007. 6
48 S.H.Han
C.G.Kang
J.H.Sung
Investigation of viscosity properties for rheology forming of
AM50A magnesium alloy,
Journal of Materials Processing Technology
2007. 6
49 W.Y. Kim
C.G.Kan
B.M. Kim
The effect of the solid fraction on rheological behavior of
wrought aluminum alloys in incremental compression
experiments with a closed die
Materials Science and Engineering
2007. 2
50 Hong-Kyu Jung
Han-Goo Kim
Chung-Gil Kang
A study on quantitative formability assessment of rheological
materials based on the microstructural characterization with a
moderate control of the process
Journal of Materials Processing Technology
2007. 2
51 S.W.Youn
C.G.Kang
Characterization of age-hardening behavior of eutectic surface
on rheo-cast A356-T5 alloy using nano/micro indentation,
scratching and atomic force microscope
Materials Chemistry and Physics
2006. 9
52 D.E.Seol
C.G.Kang
Numerical analysis of two-phase thermal flow for rheology
forging process
Solid State Phenomena
2006. 9
53 J.S.S.Babu
K.P.Nair
C.G.Kang
J.S.S.Babu, K.P.Nair, C.G.Kang Hybrid preform for metal Matrix
composites
Solid State Phenomena
2006. 9
54 Z.Yang
J.W.Bae
C.G.Kang
Effect of vertical electromagnetic stirring on the grain refinement
of A356 Aluminum alloy inoculated by Al-5Ti-B
Solid State Phenomena
2006. 9
55 S.W.Youn
C.G.Kang
Effect of nanoscratch conditions on both deformation behavior
and wet-etching characteristics of silicon (100) surface
Wear
2006. 8
56 P.K.Seo
D.U.Kim
C.G.Kang
Effect of die shape and njection conditions proposed with
numerical intefration design on liquid segregation and
mechanical properties in semi-solid die casting process
Journal of materials processing Technology
2006. 6
57 C.G.Kang
P.K.Seo
S.S.Kan
The effect of injection velocity on liquid segregation and
mechanical properties in arm part fabricated by semi-solid die
casting process
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
2006. 6
58 S.W.Youn
C.G.Kang
Characterization of age-hardening behavior of eutectic region in
squeeze-cast A356-T5 alloy using nanoindenter and atomic
force microscope,
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
2006. 6
59 S.W. Youn
H. I. Kim
C.G. Kang
A study on the effect of pattern pitch on deformation
behaviors for surface patterning by using nano-indenter
KSME
2005. 11
60 S.W. Youn
C.G. Kang
A study of nanoscratch experiments of the silicon
and borosilicate in air
Materials Science and Engineering A
2005. 10
61 S.W. Youn
C.G. Kang
Maskless patterning of borosilicate glass
nanoindentation- induced etch-hillock surface
using phenomena
Journal of Non-Crystalline Solids
2005. 10
62 D.H. Kim
B.M. Kim
C.G. Kang
Estimation of die service life for a die cooling
method in a hot forging process
Int. Adv. Manuf. Technol.
2005. 9
63 Z.Yang
Z.Q.Hu
C.G.Kang
Microstructure stress concentration : An important
role in grain refinement of rheocasting
Metallurgical and materials
2005. 8
64 C.G.Kang
J.H.Lee
S.W.Youn
An Estimation of three dimension finite element
crystal geometry model for the strength prediction
of particle metal matrix composites
J. of Materials Processing Technology
2005. 7
65 J.M. Lee
B.M. Kim
C.G. Kang
Effect of chamber shapes of porthole die on elastic
deformation and extrusion process in condenser
tube extrusion
Materials and Design
2005. 6
66 P.K.Seo
D.U.Kim
C.G.Kang
The characteristics of grain size controlled
microstructure and mechanical properties of
Al-Si alloy by thixocasting and rheocasting process
Journal of Materials Processing Technology
2005. 5
67 P.K. Seo
C.G. Kang
The effect of raw material fabrication process on
microstructural characteristics in reheating process
for semi-solid forming
Journal of Materials Processing Technology
2005. 5
68 S.W. Youn
P.K. Seo
C.G. Kang
A study on nano-deformation behavior of rheo-
formed Al-Si alloy based on depth-sensing
indentation with three-demensional surface
analysis
Journal of Materials Processing Technology
2005. 5
69 Z.Yang
C.G.Kang
P.K.Seo
Grain size control of semisolid A356 alloy
manufactured by electromagnetic stirring
Journal of Materials Science & Technology
2005. 3
70 C. G. Kang
P. K. Seo
Y. P. Jeon
Thixo diecasting process for fabrication of thin-type
component with wrought aluminum alloys and its
formability limitation
Journal of Materials Processing Technology
2005. 3
71 C.G. Kang
S.W. Youn
P.K. Seo
Data base construction on mechanical properties of
thixoforged aluminum parts and their microstructure
evaluation
Journal of Materials Processing Technology
2005. 2
72 C.G. Kang
S.W. Youn
P.K. Seo
Finite element analysis of thixo-forming process with
arbitrary shape die
Journal of Materials Processing Technology
2005. 2
73 Z. Yang
P.K. Seo
C.G. Kang
Evolution of the rheocasting structure of A356 alloy
investigated by large-scale crystal orientation
observation
Scripta Materialia
2005. 2
74 C.G. Kang
P.K. Seo
Y.P. Jeon
Thixo diecasting process for fabrication of thin-type
component with wrought aluminum alloys and its
formability limitation
Journal of Materials Processing Technology
2005. 1
75 S.W. Youn
C.G. Kang
FEA study on nanodeformation behaviors
of amorphous silicon and borosilicate considering
tip geometry for pit array fabrication
Materials Science and Engineering A
2005. 1
76 S.W. Youn
C.G. Kang
Maskless pattern fabrication on Pyrex7740
glass surface by using nanoscratch with HF wet etching
Scripta Materialia
2005. 1
77 S.W. Youn
C.G. Kang
Etching mask effect of the nanoscratched
borosilicate surface and its application to maskless
pattern fabrication
Materials Science Forum
2005. 1
78 S.W. Youn
J.W. Lee
C.G. Kang
Finite element analysis of nano/micro
pattern fabrication by nanoscratch process
Materials Science Forum
2005. 1
79 P.K. Seo
B.M. Kim
C.G. Kang
Development of horizontal reheating system for semi-
solid die casting and its microstructure evaluation
Materials Science Forum
2005. 1
80 P.K. Seo
B.M. Kim
C.G. Kang
Determination of die design rules for semi-solid die
casting process and its experimental investigation
Materials Science Forum
2005. 1
81 P.K. Seo
C.G. Kang
Microstructure characterization of rheology material
fabrication by rotational barrel type
Materials Science Forum
2005. 1